Zebralight H600 Mk III XHP35 Cool White 18650 Headlamp

Zebralight H600 Mk III XHP35 Cool White 18650 Headlamp
  • Click to enlarge
  • Click to enlarge

$135.00


Product Information
Specification

Main Features and Specifications
LED: Cree XHP35 Cool White (Nominal CCT 5700K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High:         H1 1300 Lm (PID, approx 2.2 hr)   or    H2  670 Lm (PID, approx 2.8 hrs) / 360 Lm (4.3 hrs) / 160 Lm (12 hrs)
Medium:    M1 70 Lm (33 hrs)    or    M2   32 Lm (73 hrs) / 12 Lm (8 days)
Low:         L1   3.8 Lm (18 days)   or    L2   0.43 Lm (2.8 months) / 0.06 Lm (5.1 months) / 0.01 Lm (7.1 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
 
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using ZL634 batteries. Runtimes of the two PID controlled levels (1300Lm and 670Lm) vary greatly with ambient temperature and air circulation.
Operating Voltage Range: 2.7V - 6.0V
Battery: One 18650 size (up to 69mm long) 3.6V-4.35V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
80 degree spill
12 degree hot spot
Dimensions
Head Diameter: 0.95 inch (24.2 mm)
Length:    3.85 inch (97.8 mm)
Weight
1.4 oz (39 gram) 
3.0 oz (84.6 gram) with ZL634 battery
4.4 oz (124.6 gram) with ZL634 battery and headband
Features
PID thermal regulated outputs (1300Lm and 670Lm)
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Builtin over-discharging protection (2.7V cutoff)
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade  aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Battery reverse polarity protection
Tempered optical grade glass
Orange peel textured reflector
Waterproof to IPX7 (2 meters, 30 minutes)

 

Product Code H600 Mk III XHP35
Manufacturer Zebralight
Condition New

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart