Zebralight H52 AA Headlamp Cool White

Zebralight H52 AA Headlamp Cool White
  • Click to enlarge
  • Click to enlarge


Product Information

Main Features and Specifications
LED: Cree XM-L2 Cool White (Nominal CCT 6300K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High:         H1 300 Lm (0.9 hrs)   or    H2  184 Lm (1.7 hrs) / 116 Lm (3 hrs)
Medium:    M1 54 Lm (7.5 hrs)    or    M2   27 Lm (12 hrs) / 13 Lm (27 hrs)
Low:         L1   2.9 Lm (4 days)   or    L2   0.36 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months)
Beacon Strobe Mode: 4Hz Strobe at H1 / 19Hz Strobe at H1
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Sanyo 2000mAh Eneloop AA batteries. Light output with 14500 batteries are the same except that the H1 is 535Lm for the first minute and then step down to 300Lm.
Operating Voltage Range: 0.7V - 4.2V
Battery: One 1.5V AA (NiMH, lithium or alkaline)  or 3.7V 14500 li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
80 degree spill
12 degree hot spot
Head Diameter: 0.86 inch (21.8 mm)
Length:    3 inch (76.5 mm)
1.1 oz (32 gram) 
2.0 oz (57 gram) with an Eneloop AA
2.9 oz (80 gram) with an Eneloop AA and headband 
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
All levels are current regulated
Low battery alert when the light is switched Off (LED flashes if the battery voltage is below 1.06V)
Automatic stepping down to lower output when battery (AA and 14500) capacity is low
Builtin over-discharging protection for 14500 batteries at 2.8V cutoff
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade  aluminum bar stocks
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Tempered optical grade glass
Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Waterproof to IPX7 (2 meters, 30 minutes)


Product Code H52 AA
Manufacturer Zebralight
Condition New

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.

eCommerce by CubeCart