Zebralight SC600F Mk III Plus XHP50 Floody Cool White 18650 Flashlight

Zebralight SC600F Mk III Plus XHP50 Floody Cool White 18650 Flashlight
  • Click to enlarge
  • Click to enlarge


Product Information


This flashlight draws a very high current from the batteries. You MUST use unprotected 18650s capable of 8A or more, and from name brand manufactures. Multiple pogo-pin battery contacts, rather than springs, are used in order to keep up with the high current draws and to consistently maintain an extremely low resistance over a long period of time. Unfortunately, only flat top unprotected 18650 batteries up to 65.2mm are compactible with the pogo-pin contacts. Frosted lenses have to be used in order to smooth out beam artifacts from quad die LEDs. The brightness can be perceived to be less compared to throwy lights with the same output.


Main Features and Specifications
LED: Cree XHP50 Cool White (Typical CRI: 70, Nominal CCT 5700K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
Light Output (runtimes)
High:         H1 1800 Lm (PID, approx. 2.3 hr)   or    H2  800 Lm (PID, approx. 2.7 hrs) / 515 Lm (PID, approx. 2.9 hrs) / 324 Lm (4.1 hrs)
Medium:    M1 120 Lm (12.5 hrs)    or    M2   41 Lm (36 hrs) / 23 Lm (2.6 days) / 12.5 Lm (4.6 days)
Low:         L1   3.5 Lm (15.5 days)   or    L2   0.91 Lm (1.9 months) / 0.44 Lm (2.7 months) / 0.22 Lm (4 months)
Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Sanyo NCR18650GA batteries. Runtimes of the three PID controlled levels (1800, 800 and 515 Lumen) vary greatly with ambient temperature and air circulation.
Operating Voltage Range: 2.7V - 6.0V
Battery: One 18650 size (i.e. unprotected 65.0-65.2mm long) 3.6V-4.35V li-ion rechargeable. Batteries are not included in the package.
Parasitic Drain: Negligible (much less than the self discharging of a battery)
Beam Type
Floody beam from frosted lens, with 90 degree beam spread
Head Diameter: 1.2 inch (30 mm)
Body Diameter: 0.98 inch (25 mm)
Length: 3.8 inch (96 mm)
2.26 oz (64 gram) without battery
PID thermal regulated outputs (three highest output levels) using 384 internal brightness levels and a calibrated 0.1C resolution temperature sensor
Programmable PID thermal regulation temperature target value
Built in battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
Durable electronic soft-touch switch
Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
Precision machined unibody casing from premium grade aluminum bar stocks
Proprietary heat sinking design
Durable natural hard anodized finish (Type III Class I)
Sealed and potted LED driver circuitry
Tempered optical grade glass
Battery reverse polarity protection
Pocket clip
Lanyard ring
Waterproof to IPX7 (2 meters, 30 minutes)


Product Code SC600F Mk III Plus XHP50
Manufacturer Zebralight
Condition New

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.

eCommerce by CubeCart