Zebralight SC63 18650 XHP35 Flashlight Cool White

Zebralight SC63 18650 XHP35 Flashlight Cool White
  • Click to enlarge
  • Click to enlarge

$120.00


Product Information
Specification

Main Features and Specifications

 


 

  • LED: Cree XHP35 Cool White (Nominal CCT 5700K)
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes)
    • High:        H1 1300 Lm (PID, approx 2.2 hr)  or  H2 670 Lm (PID, 2.8 hr)/360 Lm (4.3 hr)/160 Lm (12 hr)
    • Medium:  M1 70 Lm (33 hrs)   or   M2 32 Lm (73 hrs)/12 Lm (8 days)
    • Low:         L1 3.8 Lm (18 days)  or  L2 0.43 Lm (2.8 months)/0.06 Lm (5.1 months)/0.01 Lm (7.1 months)
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
  • Operating Voltage Range: 2.7V - 6.0V
  • Battery: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. Batteries are not included in the package.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • 80 degree spill
    • 12 degree hot spot
  • Dimensions
    • Head Diameter: 0.96 inch (24.5 mm)
    • Length: 3.64 inch (92.5 mm)
  • Weight
    • 1.3 oz (38 gram) without battery
  • Features
    • PID thermal regulated outputs (two highest output levels) using 384 internal brightness levels and a calibrated 0.1C resolution temperature sensor.
    • Builtin battery discharging protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade  aluminum bar stocks
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Tempered optical grade glass
    • Orange peel textured reflector
    • Battery reverse polarity protection
    • Pre-installed pocket clip
    • Waterproof to IPX7 (2 meters, 30 minutes)

 

Product Code SC63 18650 XHP35
Manufacturer Zebralight
Condition New

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart